multiSwitch – user manual
© TOPEX 2008 106
Call forward
– enables call forwarding when the user is in one of the statuses that determines call
routing;
Call forward state
– this feature contains several statuses that determine call forwarding: "
Offline
" –
the user is not in the network, "
Busy
" – the user is busy, "
No Answer
" – the user does not answer
and "
Always
" – all the calls received by the FXS user are forwarded. If you want to forward the calls in
all the situations above, select all the available options.
Call forward number
– the phone number to which the call is forwarded. This option is used if the
subscriber is in one of the forwarding statuses or if at least one option is checked;
Voice Mail
– check this option to send voicemail to an unspecified e-mail address;
Voice Mail State
– voicemail is sent only if the subscribers are in one of the following statuses:
"
Offline
", "
Busy
", "
No Answer
" or "
Always
";
Voice Mail Number
– phone number for the voicemail;
Voice Mail to Email State
– check the corresponding checkbox to enable this option;
Voice Mail to Email
– The e-mail address where voicemail messages are sent.;
Call Pickup Group
– this option associates the FXS subscriber to a pickup group;
Call Hunting Group
– this option associates the FXS user to a hunting group;
Call Hunting Priority
– select the priority for the call hunting option. You can select a value from 0 to
10. The value "0" has the highest priority;
After you finish configuring the settings in this window, press "
Submit
" to save the new
parameters.
8.7.4.2 Adding a new FXS user
At the bottom of the "Subscribers" window is the "
New User
" button that allows you to add
another FXS user in the database.
Figure 71 – Adding a new FXS user
The page contains approximately the same parameters as the editing page for FXS users,
except the "
Billing Groups
" field.
