multiSwitch – user manual
© TOPEX 2008 139
Figure 112 – Creating a client class
Rules –
the incoming and outgoing rules; select "In" and/or "Out" if you intend to enforce incoming
and/or outgoing rules. Depending on the option you choose here, you must fill in the following fields:
-
Max Calls –
maximum number of calls allowed for incoming and outgoing;
-
Call Rate –
number of calls per second, incoming and outgoing;
-
Max Taxunits –
maximum number of units (pulses) charged;
-
Max Time
– maximum interval allowed for connection; if this threshold is reached, the connection
is closed;
-
Max Time –
maximum duration of the call;
-
TOS – Type of Service –
packet prioritization service.
Translate –
he option to add a prefix in front of a number; ANI and/or DNIS numbers can be selected:
-
Ignore from ANI –
the prefix to be deleted from the ANI number. Ignores the specified number of
digits from the caller's ID (maximum 20 digits);
-
Insert into ANI –
the prefix to be added to the ANI number. Adds the specified digits (maximum
16 digits) to the Caller ID;
-
Ignore from DNIS –
the prefix to be deleted from the DNIS number. Specifies the number of digits
to be ignored from the numbers received on that direction (client class); the first x digits from the
received number will be ignored (maximum 20 digits);
