TOPEX MobiLink
IP
Preliminary Manual
There are several sections (Menu items) on the configuration page of MobiLinkIP, allowing modifying
the settings for:
-
HOME
:
this home page for configuration of the equipment.
-
NETWORK
:
settings for the local wired (Ethernet) network
-
MOBILE:
parameters for the 2G or 3G mobile voice / data networks
-
VoIP:
parameters related to the Voice over IP functions;
-
PBX:
Settings for the private phone exchange features;
-
SYSTEM:
Performs operating system functions (update, change of password, logs) and Shows
current status
-
MISC:
miscellaneous options for optimization (advanced settings). These are available only when
logging in as Administrator.
Depending upon the actual firmware version running on the MobiLinkIP gateway, one may or may not
have access to all these configuration sections or sub-sections (features, services).
The Menu bar is located to the left, and features the button Commit at the bottom.
On top of the web page, next to the Topex logo,
is a “Location” indication, which reminds the
user exactly where he is on the Web interface.
In this example, the section is
Network
and the
subsection
IP settings
(IP Settings for the
Ethernet connection).
Under the Location information is “Remote User”, which shows the name that was used for log-in,
User or respectively Admin.
Note
:
- There are two types of pages, ‘Status’ and ‘Settings’
- At the bottom of every ‘Settings’ page are these three buttons:
The button
Save
is used to save the changes performed, the
Cancel
button aborts the changes
(closes the window without modifying the current settings), and the
Default
button will reset the values
in the current page to the default (initial) configuration.
When changing the settings in any page, press the “Save” button keep these settings.
Otherwise, clicking any other link, reaching another configuration page, the modifications
performed will be lost.
TOPEX S.A. +4 021.408.39.00
Page 31 of 80
