10
Setup
3. Composite connector (
VIDEO
)
You should configure audio and video settings after connect-
ing up the digital receiver. See §
4.2
for a detailed description.
To use the HDMI output
If you have a high definition television set,
you should use an HDMI cable for best re-
sults. Plug one end of the cable into the
HDMI
socket on the digital receiver, and plug the
other end into the matching socket on your
television. In this case, you do not have to
make audio connection because it can output
stereo audio or digital audio as well.
To use the Component video output
You need to obtain a Component video cable
(RCA cable) to use the Component video out-
put. Plug one ends of the cable into the
Y
(green),
Pb
(blue) and
Pr
(red) sockets on the
digital receiver, and plug the other ends into
the matching sockets on your television.
NOTE
When connecting with the Component video cable, remem-
ber to also plug in the additional white and red audio cables
from the digital receiver to the back of your television.
