4.3 Local time setting 19
4.2.3 Audio mode
Basically, there are two audio sources as you can find two audio
sockets on the back panel of the digital receiver. You can enjoy
only one source or both of them in either stereo or mono. Set
the
Sound Mode
option as you desire.
Apart from this setting, you can change the sound mode with
the
button. See §
5.2.4
for a detailed description.
The digital receiver can output two types of digital audio sig-
nals via the S/PDIF output. One is an encoded signal, and the
other is a decoded signal. If you have the digital receiver linked
to your audio-video receiver via the S/PDIF output, you have
to set the
Digital Output
option to
PCM
, which means that the
digital receiver will output encoded Dolby Digital audio with-
out decoding so that your audio-video receiver can decode it.
Otherwise, set it to
Dolby Digital
, then the digital receiver will
output decoded Dolby Digital audio, scaling down it to two
channels.
NOTE
Only if the service you are currently watching provides
a Dolby Digital audio track, you can enjoy Dolby Digital
sound.
4.3
Local time setting
You should set your local time for timer events.