12
Installation
Connecting to the terrestrial antenna
Connect the antenna cable to the
ANT 1 IN
socket on the digital
receiver, and then connect the
RF LOOP 1 OUT
socket and the
ANT 2 IN
socket with a loop-through cable.
If you have another digital receiver, plug another cable into
the
RF LOOP 2 OUT
socket on the digital receiver and the
corresponding socket on the other digital receiver.
Connecting to the television by SCART connector
Plug a SCART cable into the
TV
socket on the digital receiver
and the corresponding SCART socket on your television.
Connecting to the television by RCA connector
Plug a RCA cable into the
VIDEO
(yellow),
AUDIO L
(white)
and
AUDIO R
(red) sockets on the digital receiver and the cor-
responding input sockets on your television or audio appli-
ance.
Connecting to the television by S-Video connector
Plug a standard S-Video cable into the
S-VIDEO
socket on the
digital receiver and the corresponding input socket on your
television. You must connect audio sockets on the digital re-
ceiver with ones on your television by a RCA cable because
the S-video socket outputs only video signals.
Connecting to the video recorder by SCART connector
Plug one end of the SCART cable into the
VCR
socket on the
digital receiver. Then, plug the other end of the SCART ca-
ble into the input SCART socket on your video recorder if
you wish to record a broadcasting program with your video
recorder; otherwise if you wish to watch the video that the
video recorder plays back just through the digital receiver,
plug the other end into the output SCART socket.
