3.2 Video and audio settings
19
3.2
Video and audio settings
You have to configure the video
and audio settings appropri-
ately to your television set and
appliances.
Select the
System Setting
>
A/V Output Setting
menu. You
should see a screen like the left
figure.
3.2.1
Television standard
The digital receiver supports two types of television standard.
One is the PAL standard, and the other is the NTSC stan-
dard. PAL was adopted in European countries while NTSC
is adopted in USA, Canada, Mexico and so forth. Refer to
Table
for television standard of your local area.
If you have a PAL television, you have to set the
TV Type
op-
tion to
PAL
. In this case, if a service is broadcasted in NTSC
standard, the digital receiver converts it into the PAL standard
for your PAL television. However, its quality would some-
what fall. The opposite case brings about the same result.
The best thing is to watch PAL services with a PAL television
and to watch NTSC services with a NTSC television. How-
ever, a multi television set is able to process both of them. So if
you have a multi television set, set the
TV Type
option to
Multi
.
With this option, the digital receiver will output them without
standard conversion. This setting is most recommended espe-
cially if you are not sure what standard type you have.
Summary of Contents for TF 5000 PVRt
