4.1 Searching broadcasting services
35
To use the USALS protocol, se-
lect the
Installation
>
USALS
Setting
menu. You should see
a screen like the left figure.
At first you have to set the
Mo-
torized DiSEqC 1.3
option to
En-
able
.
To get every satellite position calculated, perform the following
steps:
1. Choose your desired satellite at the
Satellite Name
op-
tion.
2. Select the tuner that is connected to the motorized an-
tenna at the
Tuner Select
option.
3. Enter your location to the
My Longitude
option and the
My Latitude
option with the
V
−
,
V
+
and numeric but-
tons.
4. Enter the position of your selected satellite to the
Satellite
Angle
option if it is not correct.
5. Select the
Goto the position
option; then the antenna
will turn toward your selected satellite as calculating its
position.
6. If the receiving quality, which is displayed at the bottom
right of the screen, is not good, then tune the antenna
finely with the
Move
option. The changed position is
automatically saved. At this time you had better check
the receiving quality of every transponder and choose
the best one at the
Transponder
(or
Frequency
) option. It
will be helpful to your fine tuning.
Summary of Contents for TF 5010 PVR
Page 1: ...TOPFIELD TF 5010 PVR Masterpiece User Guide Digital Satellite Receiver Personal Video Recorder...
Page 2: ......
Page 107: ......
