30
Service Search
might have to fill in the correct LNB frequency. The absolute
difference between a broadcasting frequency and its LNB fre-
quency must be within 950 to 2150 MHz. For example, if the
frequency band of your desired satellite ranges from 3660 to
4118 MHz, you have to set the
LNB Frequency
option to
5150
MHz
.
The LNB has to be supplied with electric power to operate. Set
the
LNB Power
option to
On
if it does not have any other power
supply.
You had better ignore the
22 kHz
option.
The digital receiver is designed to be compatible with DiSEqC
(Digital Satellite Equipment Control) switches. It is possible
to connect several antennas to one digital receiver by DiSEqC
switches. A DiSEqC 1.0 switch allows switching between up to
four satellite sources and a DiSEqc 1.1 switch allows switching
between up to 16 satellite sources.
Set the
DiSEqC 1.0
option and the
DiSEqC 1.1
option accord-
ing to your antenna configuration.
For example, to select the antenna con-
nected to the
A5
input in the left figure,
set the
DiSEqC 1.1
option to
2 of 4
and
the
DiSEqC 1.0
option to
1 of 4
. If you
have a mini DiSEqC 1.0 switch which
has only two inputs, you should set the
DiSEqC 1.0
option to
Mini A
instead of
1 of 4
.
4.1.2
Configuring DiSEqC 1.2 settings
Your motorized antenna will turn toward your desired satellites
horizontally by DiSEqC 1.2.
Summary of Contents for TF 5400 PVR Combo
