12
Setup
2.4.2
Connecting to your television
Between all the following connectors of the digital receiver, we
recommend you to use the first connector to get best picture
quality. If your television does not have the matching connector,
then use the next connector in the following order for better
picture quality.
1. HDMI connector (
HDMI
)
2. Component connector (
YPbPr
)
3. RGB connector (
RGB
)
4. S-Video connector (
S-VIDEO
)
5. Composite connector (
VIDEO
)
You should configure audio and video settings after connecting
up the digital receiver. See §
3.1
for detailed description.
To use the HDMI connector
If you have a high definition television set,
you should use a HDMI cable for best re-
sults. Plug one end of the cable into the
HDMI
socket on the digital receiver, and the other
end into the matching socket on your televi-
sion. In this case, you do not have to make
audio connections because the HDMI connec-
tor can output stereo audio or Dolby digital
audio.
To use the component video connector
Y
Pb
Pr
You will need to obtain a component video ca-
ble (RCA cable) to use the component video
connector. Plug one end of the cables into the
Y
(green),
Pb
(blue) and
Pr
(red) sockets on
the digital receiver, and the other end into the
matching sockets on your television.
