18
Preference Settings
Though the
Auto
setting is desirable, some television sets are
not able to display a certian resolution. The
Preferred Video
Format
option allows an exceptional resolution conversion
against such a case. For example, if your television set cannot
display 576i video, you should set this option to
576I to 576P
;
digital receiver will then only convert 576i video into 576p
video.
NOTE
You can enjoy only standard definition video with the following
connectors:
• Composite video connector (
VIDEO
)
• S-Video connector (
S-VIDEO
)
3.1.3
Sound mode
Basically, there are two audio sources as you can find two audio
sockets on the back panel of the digital receiver. You can enjoy
only one source or both of them in either stereo or mono. Set
the
Sound Mode
option as you desire.
Apart from this setting, you can change the sound mode with
the
button. See §
5.2.4
for detailed description.
The digital receiver can output two types of digital audio sig-
nals via the S/PDIF connector. One is an encoded signal, and
the other is a decoded signal. If your digital audio appliance
does not have a Dolby Digital decoder, you have to set the
Dolby Digital
option to
PCM
. Otherwise, set it to
Bitstream
.
3.2
Local time setting
You should set your local time for timer events.
