3.5 Adjusting the on-screen display
25
parency level of the on-screen display. Select the
System Set-
ting
menu and set the
OSD Transparency
option to your prefer-
ence. Its available range is from 0 to 50 percent. Normally, this
option does not apply to menus.
However, if you wish to make even menus transparent, set the
OSD Background Transparency
option to
Enable
.
With the option
OSD Transition Fade
set to
Enable
, a menu
appears fading in and disappears fading out.
You can adjust the display time of the information box. For the
information box, see §
5.2.3
. To adjust its display time, select the
System Setting
menu and set the
Info Box Display Time
option
as you desire. Its available range is from 1 to 30 seconds. If you
set this option to
No Info box
, the information box will not be
displayed when you switch services. However, pressing the
button will display the information box. If you set this option
to
Never Hide
, the information box will always be displayed.
You can always hide the information box manually by pressing
the
Exit
button.
In addition, you can raise or lower the position of the informa-
tion box. Select the
System Setting
menu and set the
Info Box
Position
option as you desire. Its available range is from
−
10
to
+
3 line.
If you feel the front display of the digital receiver is too bright,
you can lower its brightness. Select the
System Setting
menu
and set the
VFD Brightness
option to the level that you feel
comfortable with.
