2.4 Connecting up your digital receiver
11
quality. If your television does not have the matching connector,
then use the next connector in the following order for better
picture quality.
1. HDMI connector (
HDMI
)
2. Component connector (
YPbPr
)
3. Composite connector (
VIDEO
)
You should configure audio and video settings after connecting
up the digital receiver. See §
for a detailed description.
To use the HDMI connector
If you have a high definition television set,
you should use a HDMI cable for best re-
sults. Plug one end of the cable into the
HDMI
socket on the digital receiver, and plug the
other end into the matching socket on your
television. In this case, you do not have to
make audio connection because the HDMI
connector can output stereo audio or Dolby
digital audio.
To use the component video connector
You need to obtain a component video cable
(RCA cable) to use the component video con-
nector. Plug one ends of the cable into the
Y
(green),
Pb
(blue) and
Pr
(red) sockets on the
digital receiver, and plug the other ends into
the matching sockets on your television.
