8.2 From a USB memory
51
8.2
From a USB memory
If you have a USB memory stick, you can update the firmware
from it by performing the following steps:
1. Download a new firmware from the Top-
field web site.
2. Copy the firmware file to your USB memory
stick.
3. Insert the USB memory stick into the
USB
port on the back panel of the digital receiver.
4. Select the
Installation
>
USB Firmware Up-
grade
menu, then the files in the USB mem-
ory are listed.
5. Place the highlight bar on the right
firmware file and press the
OK
button, then
a countdown will be displayed on the front
display of the digital receiver.
6. When the ‘END’ message appears, restart
the digital receiver.
NOTE
Your USB memory must be formatted in the FAT file system.
Otherwise, the digital receiver cannot recognize your USB
memory. In addition, the digital receiver can only recognize
files and directories which are named with only alphabetic, nu-
meric and underscore letters. If there is a file or forlder named
with other letters, the digital receiver cannot recognize not only
it but also its subsequent files and folders.
