13
GETTING STARTED
Press the
Power
button to operate the PVR from the STANDBY mode. Now, the
Info Box will appear for a given time and disappear. By pressing the button, the Info
Box will remain on the screen. The display time of the Info Box is adjustable under the
Installation
menu of the
Main
menu.
If the current broadcast has EPG (Electronic Program Guide) with it, press the
button to see not only the current channel’s but also other channel’s EPG without
any time constraints. Also, press
button to reserve and save the current service
and to watch the broadcast automatically when it starts.
IMPORTANT: Before taking charge of your new PVR, some important technical
settings are essential.
- First, press the
MENU
button on the RCU to make the
Main
Menu appear.
- Go to the
LNB Setting
menu under the
Channel Search
item of the
Installation
menu and press
button.
- The default PIN CODE is
0000
.
- Choose the right parameters for Satellite Name, LNB Frequency, 22KHz, 12 V,
DiSEqC 1.0, and Motorized System according to your LNB and satellite settings.
If the right Satellite Name and LNB Frequency were not found in the list, call the
dealer for satellite information.
- Then, press the
MENU
button and go back to the
Channel Search
menu.
- Set the
Search Mode
to the
Auto
mode. (A
Manual
or
Advanced Search
can always be performed later on)
- Select the
Start Search...
item and press
button.
- The search procedure will take a while. Press
button when the searching
process is over (100%) to confirm and save the new channel list.
- For further information, please refer to the
LNB Setting
item of the MENU
OPERATIONS on this manual.
Summary of Contents for TF4000PVR CoCI
Page 47: ...47 IX 1 ExBlock IX GAME IX 2 Bricks Lay...
Page 48: ...48 IX 3 Bomb Hexa...
