INSTALLATION (Connection)
14
4) Connection to the TV using the RF cable.
Connect a terrestrial antenna to RF IN socket on
the PVR.
Connect one end of the RF cable to the RF OUT
socket on the PVR.
Connect the other end to the ANT IN socket on
the TV.
5) Connection to the TV using the S-VIDEO.
Connect one end of the S-VIDEO cable to the S-
VIDEO socket on the PVR and the other end to a
S-VIDEO socket on the TV.
Connection to the Antenna.
We recommend one of the following installation diagrams because of the LNB
specifications for selecting RF signal band by DC voltage and 22Khz tone.
If the PVR is installed with separated connection type, there is no restriction for zapping
while recording.
1) Installing the PVR with two separated Antennas.
The
Connection Type
in
LNB setting
menu
should be set to
Separated
.