MENU OPERATIONS
32
NOTE: If the LNB Frequency is set to Universal LNB (9750/10600 or 9750/10700), it
is not possible to set 22KHz because high or low band is selected by
22KHz.
G. DiSEqC 1.1
The PVR is designed to be DiSEqC 1.1 compatible. This allows multiple antennas to be
connected to the PVR at the same time. If you are using two or more fixed antennas or
LNBs, then it is recommended to use a DiSEqC 1.1 switch.
If you use a DiSEqC 1.1 switch only, it is possible to connect up to 4 antennas.
Set the DiSEqC 1.0 to
Disable
and select an item in DiSEqC1.1.
If you use a DiSEqC1.1 switch and DiSEqC1.0 switches, it is possible to connect up to
16 antennas. Connect the DiSEqC1.1 switch to the LNB input and connect the
DiSEqC1.0 switches to the DiSEqC1.1 switch.
Set the DiSEqC1.1 item and DiSEqC1.0 item according to the antenna configuration.
For example, set DiSEqC1.1 to
2 of 4
and DiSEqC1.0 to
3 of 4
to select
A7
.