46
Recording and Playback
back into standby mode again in one minute. However, if you
press any button on the remote control or on the front panel
even just one time, the digital receiver will not switch into
standby mode.
To add a timer recording, se-
lect the
Recording
>
Reserva-
tion
menu, then the timer list will
be displayed. To add a new timer
event, press the
F1
button, and
a box like the left figure appears.
Take the following steps:
1. Set the
Record
option to
On
to make a recording. If this
option is set to
Off
, the digital receiver will turn on at the
specified time but not record; instead, you may record
with your video recorder or suchlike in this case.
2. You may have four sources for recording: TV, radio, the
video from the external device linked to the Compos-
ite video input, and the video from the external device
linked to the Component video input. Set the
Type
op-
tion to your desired source.
3. Set the
Service
option to the service which provides the
programme you want. Pressing the
OK
button on this
option displays a services list, from which you can select
your desired service.
4. Set the
Mode
option as you desire. There are five timer
modes:
One Time
means literally ‘one time’.
Every Day
means literally ‘every day’.
Every Weekend
means ‘Saturday and Sunday every week’.
Weekly
means ‘one day every week’.
