A
85
Can not get the time to show on the front of the Toppro
.
88
I am unable to get out of the MENU
. . . . . . . . . . . .
88
No picture through RF loop out to my Television
. . . .
88
My Toppro recorder doesn’t go to standby after instant
recording (non timer recording)
. . . . . . . . . . .
88
. . . . . . . . . . . . . . . . .
88
Before you call a repair person for your Toppro product, check
the list of possible problems and solutions.
No power / No front display
• Make sure the main switch on the back of Toppro is
switched to ON.
• Properly insert the power plug into the power socket.
• If the power outlet is controlled by a switch, make sure
the wall switch is ON.
• Remove the power plug from the wall and wait 10 sec-
onds, then plug back in.
• Plug another appliance into the outlet, if the other appli-
ance doesn’t work then have a qualified electrician repair
the outlet.
• Plug the Toppro into a different outlet.
I have connected my Toppro and get no picture on the Television
• Check that you have connected the cables from the Top-
pro to the TV
• The connection must be via an AV output out of the Top-
pro to an AV input of the TV.
• Check that you are in the correct AV setting on the TV.
For example if you connected the Toppro box to AV2 on
the TV make sure you set your TV with the TV remote to
AV2 before the Toppro can be used.