www.crescentindustrial.co.uk
EX30-OCS
12.WARRANTY CONDITIONS
In accordance with the Metaalunie Conditions, the machine has a warranty period of six months
after delivery. This means that, during this period, material and manufacturing defects will only be
repaired free of charge
AFTER THEY HAVE BEEN ASSESSED BY A QUALIFIED TOPFLOOR ENGINEER’
Transportation/travelling expenses shall be for the purchaser’s account.
The warranty DOES NOT cover defects caused as a result of:
• demonstrable overloading of the machine.
• using the machine for purposes for which it is not built.
• demonstrable poor maintenance.
• not properly following the instructions in this manual.
• the use of the machine by unauthorised people.
• repairing the machine using non-OEM parts
• modifying the machine without obtaining written permission from TOPFLOOR
The warranty DOES NOT cover parts subject to wear as referred to in Section 5.
13. REPAIRS
The machine has a simple construction and parts diagrams are available on our website. Repairs
may only be carried out by competent, experienced personnel! This manual does not contain
detailed descriptions of repair procedures. If you have any questions or wish to have repairs carried
out by professionals, you can always contact TOPFLOOR.
14. END OF SERVICE LIFE
You must always comply with current local requirements and guidelines for working safely and
the responsible disposal of worn out machines! After the machine has been in use for a long time
and reached the end of its technical service life, follow the disposal procedure below:
• Clean the machine.
• Dismantle electrical components so they can be sent for recycling.
• Dismantle the plastic components so they can be handed in as separated waste.
• The remaining steel components can be sent for scrap.
Follow the ECMR (European Cleaning Machines Recycling) guidelines;
go to www.ecmr.nu for more information.
