background image

www.crescentindustrial.co.uk

EX30-OCS

15. PARTS

 

 

All parts lists are available on all Topfloor machines on the website: www.cresentindustrial.co.uk
Contact TOPFLOOR for further information about ordering parts and delivery times!! When 
ordering parts, please specify the serial number specified on the machine’s the type plate.

16. EU DECLARATION OF CONFORMITY

IN ACCORDANCE WITH ANNEX IIA OF THE MACHINERY DIRECTIVE 2006/42/EC
We, TOPFLOOR., having our business address at Crescent Industrial Ltd.

We,                               

TOPFLOOR – Industrial Floor Cleaning Machines

                                     Crescent Industrial, Berrington House, 
                                     Berrington Road, Leamington Spa, 
                                     CV31 1NB

Declare under our sole responsibility that the product: 
Brand:                           Topfloor
Machine:                       Floor preparation machine 
Type:                             EX30-OCS

To which this declaration applies, meet all stipulations in the following directives: 
Machinery Directive        2006/42/EG 
Low Voltage Directive     2014/35/EU 
EMC richtlijn                  2014/30/EU

And in conformity with the following standards and/or other normative documents: 
NEN-EN-1050:1997        Risk reduction

Drawn up in:                  Leamington Spa 
                                      05-04-2017

                                      Topfloor (Crescent Industrial Ltd)
                                      SJ Stacey, director

Summary of Contents for EX30-OCS


















Reviews: