www.crescentindustrial.co.uk
EX43-OCS
12. Guarantee terms & conditions.
The machine is subject to a guarantee period of 6 months after delivery, in accordance with
Metaalunie conditions.
These conditions stipulate that, within this period, only equipment and manufacturing errors
will be repaired free of charge, AFTER BEING EVALUATED BY AN AUTHORISED TOPFLOOR
ENGINEER.
Transport and or travel costs must be paid by the customer.
GUARANTEE CANNOT be provided for defects caused if:
• Check the earth leakage circuit breaker.
• Check the power supply.
• Check the cables for damage.
• Contact your supplier.
11. Malfunctions.
1) The machine does not start:
• A nut has vibrated loose from the ballast plates.
• A rubber from the pad holder is loose.
• The eccentric bearing is worn.
2) The machine makes a rattling sound:
STOP IMMEDIATELY!! CHECK FIRST!!
• The locking pin is bent.
• The spring is broken.
3) The adjustment mechanism of the handle does not work:
• the machine has demonstrably been overburdened.
• the machine has been used for purposes for which it was not constructed.
• the maintenance has been performed demonstrably badly.
• the information from this manual has not been properly complied with.
• the machine has been used by unauthorized persons.
• the machine has been repaired using parts which are not original.
• the machine has been modified without written consent from DEHACO.
GARANTEE CANNOT be provided for wear parts, as mentioned in chapter 5.