GTalarm3 User manual V-2022-05-24
38 |
E N
Object name:
The name and address of the object
SMS/APP Text Charset:
Text charset: Latin, Easten European, Baltic or Western European.
SIM Card PIN:
Default 1234
Installer password:
Default 000000 It allow to enter installer programming mode
SMS User Password:
Default 123456 It allow utilize arming method and enter user programming mode
User Access code format:
Select 4 or 6 digits user code format
Keyswitch Zone Mode:
Select pulse or level. The module is arming by shortening zone to COM. Arm by output activation.
I/O1... I/O2 Settings:
Set the programmable input or output to:
0-10V analog input
Output
2- wire smoke detector or
0-20 mA, 4-20mA current loop sensor
Clear Events Buffer after reset:
The memory of unsent reports will be deleted after the reset of the module
Door Chaim:
Violations of delay zones when the alarm turned off will be accompanied by keyboard audible (Buzzer) signal
Bell Squack on ARM/ DISARM:
Activate the bell output briefly causing the squawk to alert users that the module is being armed,
disarmed or that an Entry or Exit Delay was triggered
Auto- reARM:
Arm the module if there is no activity in the area after the system disarming.
Stop iButton/ RFID programming:
To finish entering iButton keys or RFID cards, click Stop programming button.
Start iButton/FRID programming mode:
All added iButton keys or RFID cards will be registered in the order of sequence by clicking “Start
p
rogramming”.
Reset Device:
Reset the module.
Test Time:
Auto Test report time of day
Test Period:
Auto Test report period
Entry Delay:
Time to enter the armed premises and enter your code to disarm your system before the alarm is triggered.
Exit Delay:
Provide with enough time to exit the protected area before the system is armed.
Bell/ Siren Cut- off Timer:
Duration of audible signal 0-9999s (sirens, Bell) after the alarm system activated.
Clock Synchronization:
automatically time synchronization with: GSM Modem, Cloud Server or disable it.
Set Module Time from PC:
Set module time from PC, which instantly provides the exact PC time.
4.3
System Fault/ Troubles Programming
System Options > System Fault/ Troubles
The System Fault/ Troubles settings let you set the communication options
if the trouble occurs and let you set system voltage loss and restore options.
