GTalarm3 User manual V-2022-05-24
47 |
E N
Enable:
The system will detect a marked trouble
Restrict Arm:
In case of such trouble, the arming activation will be restricted.
Battery trouble:
Power supply or backup battery voltage is low, needs to be recharged, or replaced
Clock trouble:
The time and date has not been set.
BUS trouble:
Do not available in this module.
Tamper trouble:
The zone(s) that was tampered
Fire loop trouble:
The trouble is occurring with your smoke detectors.
SIM card trouble:
Not available or impossible to read SIM card.
Zone antimasking trouble:
Do not available in this module
GSM network trouble:
SIM card is not registered with the GSM network provider
Trouble Event Limit:
Allowable number of the same trouble event
Low System Voltage Alarm
: The system is running on the backup battery and voltage is dropped below allowed value.
Event Delay:
System low voltage trouble event report delay.
Audible alarm when disarmed/ alarm as per zone when armed:
When disarmed:
Generates Audible Alarm. The module transmits the defined report code
and generates an audible alarm
When armed:
Follows Zone Alarm Type. The module follows the zone's alarm type
Trouble always:
Generates Trouble Only (when armed or disarmed)
Trouble when disarmed/ alarm as per zone when armed:
When disarmed:
Generates Trouble Only. The module transmits the defined report code.
When
armed:
Follows Zone Alarm Type
Tamper Disable:
The module will not generate an alarm or trouble
Figure 47How to find System Options> System Fault/ Troubles window
The system supports up to 800 user phone numbers for remote control purpose. When the phone number is set, the user will be able to arm/disarm
the system and control outputs by SMS text messages and free of charge phone calls as well as to configure the system by SMS text messages. By
default, the system accepts incoming calls and SMS text messages from any phone number. Once a user phone number is listed, the system ignores any
incoming calls and SMS text messages from a non-listed phone number as well as it rejects the SMS text messages containing wrong SMS password
even from a listed user phone number.
The module could be controlled only by these users, whose phone numbers entered in the memory of the module