GTalarm3 User manual V-2022-05-24
57 |
E N
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Figure 56 the example of Automation/Sensors (Automation/Sensors/Analog Inputs) window
Table 11 Explanation of every field in "Automation/ Sensors" window
2
Sensor Name
Sensor name
3
Sensor Type/
Hardware location=
Sensor Hardware ID
Select the sensor type hardware location
Location of sensor connected to the module. Select connected sensors
Sensor disabled
GTalarm, Input IN1…IN4, 0-10V
Voltage input IN1… IN4, 0-10V assigned
GTalarm, Input I/O1…I/O2, 0-10V
Voltage input. I/O1…I/O2 0-10V assigned
GTalarm, Input I/O1…I/O2, 0-20mA
Current I/O1…I/O2 , 0-20mA assigned
GTalarm, Input D1…D3, 1-Wire
DHT22 RH, Humidity
Digital input D1…D3, 1-Wire DHT22 RH,
Humidity assigned
GTalarm, Input D1…D3, 1-Wire
DHT22 RH, Temperature
Digital input D1…D3, 1-Wire DHT22 RH,
Temperature assigned
1-Wire Temperature sensors
Digital input D1…D3, 1-Wire DS18b20
Temperature sensor
4
Sensor Unit Text=
Unit
Sensor Unit Text
6
Max Value Alarm Event/ SMS=
Max Val SMS
Maximum allowable temperature value, which will be reported.
7
Max Value To Activate Output=
Max Val OUT
Maximum allowable temperature value, which will activate the selected output
8
Max Value Hysteresis=
Max Hyst
Temperature hysteresis value is indicated.
9
Max Alarm Event Delay=
Max SMS Delay
……………
10
Max Value output Control Delay=
Max OUT
Delay
……………
11
Output=
Max OUT
The output which will be activated, when the maximum allowable temperature value will
be reached
12
Contact ID Report Code=
Max CID
Report Contact ID code
13
Alarm Event SMS Text=
Max Alarm SMS
Text, which will be visible in SMS message in case of set temperature excess, is
entered.
14
Enable Alarm Event/ SMS=
Max SMS en
The indicated report will be sent when it is checked.
16
Min Value Alarm Event/ SMS=
Min Val SMS
Minimum allowable temperature value, which will be reported.
17
Min Value To Activate Output=
Min Val OUT
Minimum allowable temperature value, which will activate the selected output.
18
Min Value Hysteresis=
Min Hyst
Temperature hysteresis value is indicated.
19
Min Alarm Event Delay=
Min SMS Delay
……………
20
Min Value Output Control Delay=
Min OUT
Delay
……………
