GTalarm3 User manual V-2022-05-24
69 |
E N
App key in module and APP must be the same. IMEI (device UID) you can find on the modem of the module or in SERA
program System Options> System info.
11 Warranty Terms and Conditions
SAFETY INSTRUCTIONS FOR SERVICE PERSONS
Use the following list as a guide to find a suitable place for GTalarm3 module:
• Locate the module near a power outlet.
• Select a place that is free from vibration and shock.
• Place the module on a flat, stable surface and follow the installation instructions:
Do NOT locate the module where persons can walk on the secondary circuit cable(s).
Do NOT connect the module to electrical outlets on the same circuit as large appliances.
Do NOT select a place that exposes the module to direct sunlight, excessive heat, moisture, vapors, chemicals or dust.
Do NOT install the module near water (e.g., bathtub, wash bowl, kitchen/laundry sink, wet basement, or near a swimming pool).
Do NOT install the module and its accessories in areas where there is a risk of explosion.
Do NOT connect the module to electrical outlets controlled by wall switches or automatic timers.
AVOID sources of radio interference.
AVOID setting up the equipment near heaters, air conditioners, ventilators, and/or refrigerators.
AVOID locating module close to or on top of large metal objects (e.g., metal wall studs).
Safety Precautions Required During Installation
• NEVER install the module during a lightning storm.
• Ensure that cables are positioned so that accidents cannot occur. Connected cables must not be subject to excessive mechanical strain.
• The power supply must be Class II, FAIL SAFE with double or reinforced insulation between the PRIMARY and SECONDARY circuit/ENCLOSURE and
be an approved type acceptable to the local authorities. All national wiring rules shall be observed.
Limited Warranty
