GTalarm3 User manual V-2022-05-24
8 |
E N
1.6
System Access codes. Default passwords.
Table 5 Default passwords and explanation
Password
Default
How to find and how to change
Explanation
SIM card PIN
1234
SERA2> System Options> General system options
It is automatically ignored if pin request in SIM card
is disabled
Installer
Password
000000
SERA2> System Options> General system options
This password allows you to enter programming
mode, where you can program all features,
options, and commands of the module.
SMS User
Password
123456
SERA2> System Options> General system options
This code allows you to utilize arming method, as
well as program user codes.
User password of
GSM operator
123456
SERA2> GSM Communications> GPRS/IP/TCP/UDP
User password of GSM operator network where
SIM card inserted in the module is operating.
App Key
123456
SERA2> GSM Communications> Sera Cloud Service
“APP Key” in module must be same as Remote
connection password via [cloud app] also in [SERA
remote] default: 123456
Installer code
(for SMS control
and configuration)
000000
INST000000˽090˽PSW
090= command code (Change of installer‘s code)
PSW
= New Installer‘s password.
6-digit password used for system configuration,
control and request for information.
User code
(for SMS control
and configuration)
123456
INST000000˽091˽PSW
Change user‘s code
091= command code (Change user‘s code)
PSW = New u
ser‘s password.
6-digit password used for system control and
request for information.
Master password
(Keybutton code)
1234 or
123456
(if selected
6 digit)
in user table
SERA2> Users/ Access control
6 or 4 digit code selected:
System Options> General system options> User
Access Code Format
Control functions for all newly associated keys will
be assigned according to MASTER key. For
example: If MASTER key will control Out1, all
newly associated keys will also control Out1.
Figure 2 App key must be the same in all configuration fields
APP Key: 123456 used with the App and for connecting to the module remotely.
“APP Key” in module must be same in:
Sera2> Settings (in the command line) and Sera2> GSM Communications> Sera Cloud Service