GTalarm3 User manual V-2022-05-24
59 |
E N
Figure 57 The example of GSM Communication > SERA Cloud Service window
Table 5 explains every field in the of Reporting SMS & DIAL > TCP/ IP Remote Control window
Table 12 Explanation of every field in "TCP/ IP Remote Control" window
1
Enable
Check the particular checkbox to enable remote control/configure module over internet.
2
IP or Domain
IP address xxx.xxx.xxx or domain name of remote control server.
3
Remote Port
Remote server port.
4
Ping Time
Period of communication test signal PING sending via GPRS channel.
5
Encryption Key
Server encryption key
.
4.15 Events Log
Events Log
The Event Log window show real time information of the events that has been occurred
The event log allows to chronologically register up to 2048 time stamped records regarding the following system events:
System start.
System arming/disarming.
Zone violated/restored.
Tamper violated/restored.
Zone bypassing.
Temperature deviation by MIN and MAX boundaries.
System faults.
Configuration via USB.
User phone number that initiated the remote configuration.
Communication with monitoring station status.
Figure 58 the example of the Events Log window.
Table 5 explains every field in the Events Log window.
Table 13 Explanation of every field in "Events Log" window
1
Read Event Log
Events could be read from the module by clicking
Read Event Log
button
2
Clear Event Log
Events could be cleared from the module by clicking
Clear Event Log
button
3
Event Number
Event sequence number
4
Event
Object number and registered event report in Contact ID code.
5
Time
Event date and time.
6
Note
Event report text which was indicated.
To export the event log to .log file or clear it, please refer to the following configuration method.
4.16 Remote Monitoring, Control, Configuration, FW update over the internet
What can be done remotely connecting to a module over the internet?
The system parameters may be changed
Monitooring system status, temperature sensors may be observed.
Firmware updare of the module
How does it works?
Remote connection is established via GPRS using TCP/IP protocol;
