GTM1 User manual V-2020-08-12
50 |
E N
094= command code (SMS from the module resending to the other phone number)
TEL = phone number to which will be forwarded sms text
SMS = sms text that will be send to the referred phone number
USER123456
˽100 ˽N
System state request:
100= command code (System state request)
N = System state request type
1- System test request, Request information about the module (: IMEI, FW, LEVEL etc.)
2- the values of active sensors request
3 -Request about active zone states
4 -Request about output states
5 - System state request. The module will send information on input/output states and system state
(ARM/DISARM/STAY).
Only for the firmware versions > 190926
10 APP configuration
Figure 95 https://cloud.topkodas.lt/index.php> Settings and GSM Communications> Sera Cloud Service windows
App key in module and APP must be the same. IMEI (device UID) you can find on the modem of the module or in SERA program System Options>
System info.
Figure 96System Options> System Info window
11 Warranty Terms and Conditions
