User guide BIOTOPLING-3BT
________________________________________________________________________________________
_____________________________________________________________________________
-- 24 --
TOPLING
JUNE 2012
3BT 25-50 kW
button
for two seconds, unless
STOP
appears on display. In the event that the fuel type
"WOOD THEN PELLET" is selected, after each boiler feeding with solid fuel, it is necessary to
choose the TYPE OF FUEL on display, and re-select "WOOD THEN PELLET". The same
should be done in the case the fuel type "WOOD THEN EL. HEATERS“ is selected. The
objective of this action is to reset the timers significant for automatic startup of pellet boilers, or
electricity boiler. On the display "EL. HEATERS POWER" the number of electric heaters that will
be loaded if "EL. HEATERS“ is selected as a fuel (0KW, 9KW, 18 KW). The existence of symbol
"electric heaters" means that one or both electric heaters (9 KW and 18 KW) are involved.
By pressing the button
for two seconds you enter into display where time and date
are set.
By pressing the button
for two seconds you enter into display where boiler operation
time program is set.
By pressing the buttons
,
date of certain time program is set, and by pressing
the button
settings for selected date are done.
The values shown on the display represent the time within which the boiler will be in use.
Values are set by pressing the buttons
and
, and are confirmed by pressing the button
, and an underscore (_) is shown under currently active variable. Settings can be made
independently for each day, and there are two time intervals for the boiler use for every single
day. After you finish entering the last value in the time program the form that asks if you want to
copy the same time pattern for the next day of the week is shown on display.
