User guide BIOTOPLING-3BT
________________________________________________________________________________________
_____________________________________________________________________________
-- 36 --
TOPLING
JUNE 2012
3BT 25-50 kW
8. DISPOSAL AFTER END OF LIFE
9.1. Dismantling boiler
Danger!
The boiler must be disassembled by a professional.
Material damage and injury can occur if an unprofessional person disassembles the
boiler.
Dismantling of the boiler from central heating installations should be performed at
following stages:
1. Switch off the boiler, i.e. stop the boiler operation
2. Leave enough time for boiler and the boiler mechanism to burn the remains of
pellets
3. Separate the boiler from the power supply
4. Isolate boiler heating system by closing the valve, and then drain the water from
the boiler
5. Demount pellet storage
6. Demount boiler panelling
7. Separate mineral wool from the boiler
9.2. Disposal of boiler
The following components of the boiler are made of steel and must be handed to the
centre for collection of secondary raw materials.
•
The body of the boiler,
•
Plating boiler
•
pellet storage
•
Screw conveyor
•
Motor reductor
•
Boiler furnace.
Electrical components are necessary to be collected and handed to the centre for
collection of secondary raw materials.
Glass Braid (located on the door of the boiler), mineral wool and plastic parts, must be
separated and handed to the centre for collection of secondary raw materials.
Do not throw the boiler components in the dumpster.
