- 3 -
Read operator’s instructions
Dear customer, thanks for your choice of stone cutter FTD-202A. Please read this
manual carefully before installation and operation, and follow it. Please keep this manual
in a safety place for future reference.
Ⅰ
SPECIFICATION
Mains voltage (Volt):
230 VAC/50Hz
Motor capacity S1:
1200W
Insulation class
B
House protection class
IP54
No load speed (rpm):
2950
Max. Cutting Depth 90
°
/45
°
: 35/25mm
Maximum Cutting Length: 762mm
Diamond blade size:
Ø200XØ22.23mm(bore)
Table/Extension size: 1100X500mm/0~250mm
Net weight:
53 kgs
Noise emission values determined according to EN 61029 and EN 12418:
The sound pressure level at the work station,
No load: LpA <=71.4dB (A)
LpA <=72.3dB (A)
Under
load:
LpA=97.9dB(A) LpA=99.1dB(A)
Uncertainty KpA=1.5 m/s
2
Uncertainty KpA=1.5 m/s
2
The sound power level of the machine,
No load: LwA=84.4dB(A)
LwA=85.3dB(A)
Uncertainty KwA=1.5 m/s
2
Uncertainty KwA=1.5 m/s
2
Under load: LwA=110.9dB(A)
LwA=112.1dB(A)
Uncertainty KwA=1.5 m/s
2
Uncertainty KwA=1.5 m/s
2
Vibration total values determined according to EN 61029:
No load: Vibration emission value a
h
=1.20 m/s
2
Vibration emission value a
h
=1.20 m/s
2
Uncertainty K=0.73 m/s
2
Uncertainty K=0.76 m/s
2
Under load: Vibration emission value a
h
=1.15 m/s
2
Vibration emission value a
h
=1.15 m/s
2
Uncertainty K=2.95 m/s
2
Uncertainty K=3.04 m/s
2
Cooling water pump specification:
Power 10W
Qmax 700L/H
Qhead 1.4m
Caution! Any modification which could lead to a change in the original characteristics of the
machine, such as rotational speed or maximum diameter of the cutting-off wheel may be carried
out only by the manufacturer of the machine.
