background image

INTRODUCTION

Thank you for purchasing the MX series MX.22 / 2FX & MX.26 / 2FX mixing console. The
MX.22 / 2FX mixing console is packed with some features that can not be found in other
consoles of its size: 4 mono (these are provided with ultra low noise microphone pream-
plifiers and phantom power at +48V) and 2 stereo input channels (4 channels for MX.26/2FX )
and each of them is provided with warm, natural EQ; 2-Track inputs assign-able to Main mix,
Phones / Control Room outputs etc. Besides, the 24-bit effect processor with 256 effects.
Please read this manual carefully so you can take advantages of all the features of the MX
series.
Thank you again for making the right choice in purchasing the TOPP PRO MUSIC GEAR.

FEATURES

4 mono inputs with gold plated XLR and Balanced TRS jack
2 (4 for MX.26/2FX) stereo inputs with Balanced TRS jack
GAIN control and +48V phantom power for mono inputs
3-band EQ (plus 75Hz low cut filter) on all mono channels (For MX.22/2FX)

3-band EQ with sweepable MID (plus 75Hz low cut filter) on all mono channels and 4-band
EQ on stereo channels (For

)

2 AUX sends: AUX1 with PRE / POST-fader switch for monitoring, AUX2 POST-fader for

effect sends can be changed in PRE-fader for monitoring

Each input channel features MUTE/ALT3-4, SOLO switches and OL LED (MX.22/2FX)
MUTE, SUB1-2 and L-R assign switches, SOLO switches and OL LED (

)

2-Track IN/OUT with discrete switches for routing to Control Room and to Main Mix
Two different ways of SOLO PFL/AFL for a better control over signal path
Balanced XLR & TRS jack output
24-bits internal DSP with 256 effects (16 presets by 16 variations), DSP MUTE & Peak LED

MX.26//2FX

MX.26/2FX

USEFUL DATA

Please write your serial number here for future reference.

Serial Number:

Data of Purchase:

Purchased at:

Summary of Contents for MX.22/2FX









Reviews: