Topp Music Gear MX.3, User Manual

MX SERIES

1- USB PORT 

This Type B USB port can be used to connect the computer  via Type

B to A connector. 

2- POWER SWITCH

To turn on/off the unit. 

3- POWER LED

This LED will light up when the unit is powered on.

4- MIC/LINE IN JACK

This combined jack can be used to connect mono signal, such as XLR

microphone or 1/4" line level. 

*Note: Please choose balanced cable and MIC to connect. Do not 

use  th e u nba lanced ones. When the unit is powered on, remember 

not to con nect the high level signal to XLR  MIC IN, which may dam age

the unit.

5- LINE IN JACK

This RCA jack is used for connecting stereo line in signal source.

6- CD/TAPE IN JACK

This RCA jack is used for connecting stereo line in signal source.

7- CD/TAPE OUT JACK

This RCA jack is used for connecting stereo tape recorder.

8- MAIN OUT JACK

This 3.5mm stereo jack is used to con nect the ac tive stereo speaker.

9- MONITOR OUT JACK

This 3.5mm stereo jack is used to connect the stereo headphone.

10- GAIN CONTROL

It is used for adjust the level of mono input.

11- HIGH

This treble control can be used to reduce the HF noise or boost the

sound of percussion.

MX SERIES

11

12- LOW

This bass control can be used to boost male or effect of drum & bass.

8

Type:
Frequency
Response

Distortion
(THD&N)

MIC EIN
(Equivalent
Input Noise)

CMRR

3 Channel USB MIXER
Mic Input to any Output
(Gain @ 0 dB,Rated output level)

 10 Hz to 40 kHz(0, -1dB)

  10 Hz to 100 kHz(0, -3dB)

Mic Input to MAIN Output
(Gain @ 0 dB,Rated output 
level @ 20 Hz-20 kHz bandwidth)

 0.01%(A-weighted)

Input: Channel INPUT MIC
(Rs = 150 

, Gain @ Max.,

20 Hz-20 kHz bandwidth)

  -118dBu(A-weighted)

   70dB 

  Mic in to main out
  (Gain @ Max.,@ 1 kHz)

Input Gain 
(20 Hz-20 kHz)

 Mono Channel 

Stereo Channel 

    MIC:0 to 50dB,LINE:-35 to +15dB

Attenuation
(Crosstalk)
(20 Hz-20 kHz)

Line in, 1/4" TRS Main Out,1 kHz relative to 0 dBu, 22 Hz

22 kHz Filter, Gain @ unity.

Main Mix knob/fader @ -

     -79dBu(A-weighted)

Channel Level knob/fader @ -      -79dBu(A-weighted)

Rated Output 
Level

Main, monitor, tape output
(all knob/fader @ 0 dBu,1 kHz)       0dBu

Maximum
Output Level

Main,

, tape output

(all knob/fader @ 0 dBu,1 kHz, 
22 Hz

22 kHz Filter,THD @ 1%)

monitor

        +17dBu

Maximum
Voltage Gain
(EQ and PAN/
BAL knob  @ 
0 dB, Other all 
knob or fader 
@ max,1 kHz, 
Rs=600

)

Mono Channel MIC INPUT
MAIN OUT(3.5

 jack stereo)

Mono Channel MIC INPUT
M

(3.5

 jack stereo)

onitor

Mono Channel MIC INPUT
TAPE OUT(RCA)
Mono Channel LINE INPUT
MAIN OUT(3.5

 jack stereo)

Stereo Channel LINE INPUT
MAIN OUT(3.5

 jack stereo)

TAPE INPUT
MAIN OUT(3.5

 jack stereo)

TAPE INPUT
M

(3.5

 jack stereo)

onitor

         69dBu

        78dBu

        69dBu

        53dBu

        16dBu

        6dBu

        9dBu