SPINNAKER
KIT
continued
B. You are now ready to attach the spinnaker sock and pole to
the boat.
Ensure sock is fed over the striker bar.
Attach velcro straps around spinnaker pole.
C. Then attach back of spinnaker sock around either side of the
base of the mast.
(4)
One line attaches to the mast foot.
(5)
The second line at-
taches through loop on front of trampoline (next to the capsize
line pocket).
D. Tie loop
(6)
in spinnaker pole bridle rope,
(7)
feed through eye
on front hull by main bridle.
(8)
Take rope back through loop and
then
(9)
tie off on eye. Repeat on other side and pull tight till there
is a slight bend in the spinnaker pole.
E. (1) Take line from the chute mouth and (2) tie off on to the eye
on the front of the hull.
SPINNAKER
HALYARD
A. To secure one end of the spinnaker halyard, tie to bridle
for time being.
B. Take other end of spinnaker halyard down mast and through
pulley on back of spinnaker pole running from back of boat
forwards.
Remove the rope that is securing the double block to the
spinnaker pole (this is for shipping purposes only).
4
5
2
6
8
9
7
6
1
9
