User Manual of MT08B
- 33 -
10. GPRS Command From platform to GPS Tracker
1. 4101 Request one single location report
2. 4102 Set time interval for continuous tracking
3. 4103 Set authorized phone number
4. 4105 Set speed limit for over speed alarm
5. 4106 Set movement alert
6. 4107 Set out Geo-fence
7. 4110
Initialize all parameters except for password, IP/PORT/APN, ID and time
interval for continuous tracking
8. 4114 Output control (safe - 10Km/h)
9. 4126 Set power saving when tracker is immobile
10. 4127 Set in Geo-fence
11. 4130 Set telephone number for wiretapping
12. 4132 Set time zone
13. 4145 Set odometer interval for continuous tracking
14. 4902 Reboot GPS
15. 5114 Output control (safe - 20Km/h)
16. 9001 Read version / Tracker reply version
17. 9002 Read time interval of continuous tracking
18. 9003Read authorized phone number / Tracker reply authorized phone number
11. Troubleshooting
Problem: Unit will not turn on
Possible Cause:
Resolution:
Wiring was not connected properly
Check
and
make
sure
wiring
connection
is in order.
Battery needs charging
Recharge battery
Problem: Unit will not respond to SMS
Possible Cause:
Resolution:
GSM antenna was not installed properly
Make MT07 connected to GSM
network.
GSM Network is slow
Wait for SMS. Some GSM networks
slow
down during peak times or when they
have equipment problems.
Unit is sleeping
Cancel sleeping mode
Summary of Contents for MT08B
Page 2: ...User Manual of MT08B 2 ...
Page 11: ...User Manual of MT08B 11 For Motorcycle 7 SMS command of tracker MT08 ...
Page 23: ...User Manual of MT08B 23 3 Click Team Management under Vehicle Manage 4 Click New ...
Page 27: ...User Manual of MT08B 27 1 Click Vehicle Management and click New ...