User Manual of MT08B
- 14 -
P is the button number and should be 1,or 2, or 3.
If SOS button is linked to IN1, then P=1.
T: Preset phone number (T must be less than 16 digits)
T1: When no T2, T1 for short message number or dial the number; when have T2, T1
for message number.
Example: command: W000000,003,3,1,18814655985
7.1 extend SMS command
Presetting by SMS for GPRS tracking
Set over speed alarm
W000000,005,XX
Description:
XX(the speed preset value)
XX=00, disable
XX=[01<XX<20] (unit:10Km)
Example:
SMS send: W000000,005,10
SMS receive: SET OK! SPEED LIMIT:100Km/h
Meaning: If your speed is over 100Km/h, an
alarm SMS will be send to GPS tracker and
upload to tracking platform.Tracker ID must be
less than
14 digits
Set movement alarm
W000000,006,XX
Send this sms command when the MT08 pick
up GPS signal, it is base on current longitude
and latitude, if vehicle have been move setting
distance, it will trigger alarm.
XX (set distance from current central point
place )
=00, disable
=01, 30m
=02, 50m
=03, 100m
=04, 200m
=05, 300m
=06, 500m
=07, 1000m
=08, 2000m
Summary of Contents for MT08B
Page 2: ...User Manual of MT08B 2 ...
Page 11: ...User Manual of MT08B 11 For Motorcycle 7 SMS command of tracker MT08 ...
Page 23: ...User Manual of MT08B 23 3 Click Team Management under Vehicle Manage 4 Click New ...
Page 27: ...User Manual of MT08B 27 1 Click Vehicle Management and click New ...
