Form # 20070310
•
Assemble the frame as shown in the diagram by performing the following steps in order:
1. Assemble the perimeter first by inserting the poles in sequence. Note: When assembling the
perimeter on the final side, the male/female connection in the middle should be the final
connection of the side.
2. Connect the rafters to the cluster. Note: Connect corner rafters to cluster first (shorter tube on
the cluster)
3. Install the ridge poles and intermediate roof rafter brackets. Note: It may be necessary to push
outward on the intermediate rafter to get it to seat in the roof rafter bracket.
•
Take the top from the bag and lay it over the frame.
•
Raise the frame and insert the legs into the brackets making sure the snap button is engaged in the hole of
the bracket.
•
Attach the vinyl top to the frame with the side release buckles along the perimeter.
•
Raise the tent to the desired height with the adjustable bases - if so equipped.
•
Outguy as needed.
Installation Instructions
SFD-2030
C
A
A
A
A
A
A
B
D
D
C
D
D
D
C
D
C
D
D
D
D
C
C
C
C
B
C
C
B
C
C
A
A
A
B
B
C
B
C
B
C
C
B
C
B
C
B
D
C
C
D
D
A
E
