GROUND CLOTH
ASSEMBLED
20 FT. LONG
PERIMETER POLES
GROUND CLOTH
ASSEMBLED
20 FT. LONG
PERIMETER POLES
1
2
3
TENSION
CABLES
Sierra Hexagonal Tent Installation Instructions
Step 1
. Lay ground cloth over desired location of tent
being installed. Arrange poles and corner brackets in
sequence as shown above.
Step 2
: Stretch cables to opposing corners as shown
in diagram above.
Note: Remember location of top cable for center pole
installation (Step 5)
Components for the Hex tent installation
are as shown above.
Tent Top (1)
Leg Pole (6)
Perimeter Pole (6)
Center Pole (1)
Top Tie Down (6)
36" Nail Head Stake (6)
18" J-Hook Stake (6)
Leg Base (6)
Corner Bracket (6)
Cross Cable (3)
Ratchet or Rope - Out Guys (6)
Please read these instructions in advance of
assembly. Always be cautious of wind and
weather conditions. Partially assembled tents
are large sails in windy conditions. Always tie
off frames.
RECOMMENDED TOOLS AND EQUIPMENT
Personal Safety
•
Gloves and Hard Hat.
Site Transport
•
Hand Truck for Moving Components.
Frame Assembly
•
Various wrenches and other types of tools (varies
according to tent size)
•
Tent jack for raising frame to install legs.
•
Ladder - Minimum six (6) foot tall.
Stake Installation and Removal
•
1" capacity rotary hammer for drilling holes in pavement
for stakes.
•
An 8 to 16 pound sledge hammer.
•
24" Pipe Wrench for spinning stakes out of wet soil.
•
Mechanical stake puller.
Top Installation
•
Ground cloths to protect vinyl from dirt and abrasion.
•
Cleaning supplies to remove any marks acquired during
installation.
Form # 20040813
Sierra Hex
