www.toptechone.com
- 11 -
9.
Cross arm unit
10.
Flame unit
11.
AVC UNIT
（
built-in
）
(1) Effective cutting scope of cross arm:
Effective cutting 1000L: full length of 1900mm
Effective cutting 1250L: full length of 2110mm
Effective cutting 1500L: full length of 2500mm
(2) Effective cutting scope of track foundation:
Effective cutting 1500L: full length of 2050mm
Effective cutting 2500L: full length of 3090mm
Effective cutting 3000L: full length of 3540mm
(3) Control of main body
3. Machine Installation
3.1. Overview
In order to make sure the machine can be smoothly moved and operated, the
machine must be placed on a steel plate with relatively small vibration or the machine
must be fixed. Meanwhile, it is required to avoid placing the machine in the open air
to assure its cutting quality and operating performance.
3.2. Completion Machine Installation
After receiving the mini-type CNC cutting machine, the user shall count the
article according to the packing list and place it in a reliable position (note: the U disk
software decryption dog of programming software optic disk shall be properly
collected. NESTING SOFT IS OPTION). The equipment shall be split and packed
separately. After the equipment arrives at the user’s site, the user is required to
assemble the equipment independently. The assembly process is shown as follows:
3.2.1. Count articles necessary to installation.
(1) List of Devices of Standard Machine:
Main body: 1 piece (including power line and 8P control line)
Vertical foundation track: 1 piece; cutting range optional (effective 1500L, 2500L
