www.toptechone.com
- 20 -
cutting with following form to adjust cutting parameter of flame cutting.
□
Cross direction switch: particular 4-direction switch can option the machine
to the correct direction. During inching pattern, push the switch then the machine
moves, release the switch then the machine stops. During linkage pattern, push
once the switch the machine will start to moving, and release the switch the
machine will keep on moving, and push the switch to any other direction, the
machine will stop.
□
. RATE SERIES 2100T control system: it is the main operating system of the
device. It is capable of carrying out some complicated operations like cutting
programming, cutting setting, program switch and saving, etc.. (See RATE
SERIES 2100T Operating Manual for specific operations).
4. Brief Introduction to Mechanical Parts
4.1 Mechanical Movement Structure
The mechanical movement structure is composed of the following a series of single
parts.
4.1.1 Vertical driving device: it is composed of vertical straight-line guide rail,
vertical gear, rack, etc..
4.1.2 Horizontal driving device: it is composed of horizontal guide pulley, horizontal
aluminum guide rail, horizontal gear, rack, etc..
4.2 Cutting Torch Device
The cutting torch device is composed of cutting torch body, two-way valve, gas
supply pipe, etc..
4.3 Cutting Torch Lifting Device
The cutting torch lifting device is composed of lifting motor, lead screw, sliding
