GT08 GPS Motorcycle/Vehicle Tracker User Manual
Page
9
X=0, Chinese ; X=1, English; X=2,
Portuguese;
X=3, Spanish ; X=4, Arabic ; X=5, French;
(Default setting: X=1, English)
Other SMS Command List
Note: ****** is user‟s password and the default password is 000000. The
tracker will only accept commands with the correct password.
Functions
SMS Command
Example
Auto Report by SMS
******SEC:5:X
111111SEC:5,3;
Remarks: To set time interval for continuous automatic report via SMS.
X is the interval in minute. If X=000 to turn off tracking by time.
Example, the tracker will send location data back to your mobile phone every 3 minutes.
Geo-fence Alarm
W******,017,X
W******,117,X
W000000,017,
11404.0000,E,2232.0010,N,
11505.1234,E,2333.5678,N
Remarks: 017 is for alarm when tracker moves out the preset scope; 117 is for alarm when
tracker moves in.
When the tracker moves in or out, it will send a SMS alarm to the authorized phone number
for SOS.
X is the coordinates which include:
Lower-left X,Lower-left Y,Upper-right X,Upper-right Y
For example, 11404.0000,E,2232.0010,N,11505.1234,E,2333.5678,N
Note:
1. Lower-left X should be less than Upper-right X;
2. All longitudes and latitudes should be in ASCII format as follows:-
Lo
ngitude: DDDMM.MMMM,E/W. 4 places of decimal. „0‟ is needed to be stuffed if no value
available.
Latitude: DDMM.MMMM,N/S. 4 places of decimal. „0‟ is needed to be stuffed if no value
available;
3. Only one alarm can be set in either Movement Alarm or Geo-fence Alarm;
4. Send W******,006,00 to turn off Geo-fence function.
Movement Alarm
******
NUM:6:X,
111111
NUM:6:150,
Example: it is set the radius of movement alarm as 150meters.(Default setting:100meters)
