GT08 GPS Motorcycle/Vehicle Tracker User Manual
Page
8
Over-speed Alert
111111SPD:X
x is the speed in KM/H , maximum value is 255M/H
(For example: 111111SPD:120, if the car speed is over 120KM/H, it will
send alert SMS to warn you).
111111SPD:0
to disable the over-speed alert. It is the default setting.
111111SPD:
to check the setting of over-speed alert.
Remark: this function is just for reference, because there might be some
time delay or error in detecting the running car
’s real speed by GPS.
Set up the Shock Sensor
111111SHK:
To check the setting of shock sensor.
111111SHK:S=X,N=Y,
X: is the time in seconds, range:1-20 seconds
Y: is the vibration times.
(Default setting:
X=3 seconds, Y=3 times.)
Example:111111SHK:S=5,N=2, : if tracker is vibrated twice in 5 seconds, it
will trigger vibration alarm.
Odometer & Engine Run Time .
111111ODO:
It is used to read the present odometer value & engine run
time.
111111ODO:O=X,H=Y,
it is used to set the basic value of odometer and
engine run time. (X: meters, Y: seconds)
Example: 111111ODO:O=300,H=10, it means that the basic odometer is
300meters, basic engine running time is 10 seconds. System will start
accumulation from this basic values.
Define SMS Content in Different Languages.
SMS command: 111111LNG:X
it is used to define the SMS content in different languages.