TK218 OBD-II GPS Tracker
User Manual
Page12
is in sleep mode, it will not upload the CAN-BUS data any more.
(1) Real-time vehicle data
1. Battery voltage (V)
2.Engine speed (RPM)
3. Running Speed (Km/h)
4. Throttle opening
width (TPS %)
5. Engine load (%)
℃
)
7. Instantaneous fuel
Consumption (L/100km)
8.Average fuel consumption
(L/100km)
9. Driving range (Km)
10. Total mileage (km)
11. Single fuel consumption
volume (L)
12. Total fuel consumption
volume (L)
13. Current Error code
numbers
14. Harsh acceleration No.
(times)
15. Harsh brake No.
(times)
(2) Driving behavior data
1.Total ignition no. (times)
2.Total driving time (h)
3. Total idling time (h)
4. Average hot start time (s) 5. Average speed (km/h)
6. History highest speed
(km/h)
7. History highest rotation
(rpm)
8. Total Harsh acceleration No.
(times)
9. Total Harsh brake No.
(times)
(3) Error code of the vehicle
The request command should be sent to the device firstly, then it will send
out the error code if it has. User can judge the malfunction type according to the
code.
V . Specifications
Working voltage: +10.0 ~+60VDC
Power Consumption: Standby current:12mA
Working current: 35mA;
Deep sleep mode current: <4mA;
Inside Backup battery:
Rechargeable 3.7V 230mAh Li-ion battery
Size of the main unit:
52*38*26
(mm)
Weight of the main unit: 55g
Working temperature: -20 ~ 85
℃
Humidity: 0 ~ 95%
GSM frequencies: Quad-band: 850MHz/900MHz/1800MHz/1900MHz
