TK218 OBD-II GPS Tracker
User Manual
Page 3
I. Features & Functions
1. Plug & play design with OBD-II connector, compatible with all the vehicles
with OBD-II connector, supports most of vehicles with the CAN-BUS;
2. Track on command or by time interval via SMS/GPRS;
3. Arm/disarm by SMS or phone call.
4. Check the car’s real physical address (such as city name, street name.);
5. Track by mobile SMS to get the latitude, longitude, speed, direction &
odometer etc.
6. Check the location directly by the Google map’s URL;
7. Data logger to store 5520 waypoints.
8. Smart engine ON/OFF detection;
9. Odometer function
10. Over-speed alarm;
11. Movement alarm which can be used as an alarm;
12. Engine on alarm;
13. Vibration alarm;
14. Power failure alarm, with internal rechargeable backup battery;
15. Routine optimization when vehicle turns a corner;
16. Monitor the voice;
17. Voltage range: 10V-60VDC, suitable for motorcycle, car or big truck.
18. Reliable design of framework with hardware watchdog.
19. Extreme power save working mode, power consumption could be less than
4mA.
20. Detection on internal battery's volume & vehicle battery's voltage.
21. Remote diagnostics function. Transmission of the CANBUS data via GPRS
network: (1) Vehicle's real-time data: battery's voltage, RPM, speed, TAP
throttle opening, engine load, coolant temperature, fuel consumption,
odometer, error code & times, acceleration times & deceleration times; (2)
Driver behavior data: ignition time, total driving time, total idling time,
average engine hot-start time, average speed, history high speed, history
RPM, total acceleration times & total deceleration times.
