TK218 OBD-II GPS Tracker
User Manual
Page 5
Check the Vehicle’s Status
SMS command:
111111CHK
(or
111111chk
)
This instruction is used to inquiry the vehicle’s location & system’s status.
The system will send back the SMS, includes the similar information, such
as “Armed……”
Arm/Disarm the System by SMS
SMS command:
111111ARM
(or
111111arm
)
This SMS instruction is used to arm the system
When the system is armed, the movement alert is activated automatically.
When the motorcycle/car moves, the alarm will be triggered.
SMS command:
111111DSM
(or
111111dsm
)
This command is used to disarm the system & stop sending alert SMS.
Check the location by Google Map’s URL
SMS command:
111111MAP
(or
111111map
)
Upon receiving the SMS command, the tracker will automatically send back
the SMS including the Google map’s URL, user can use smart phone (GPRS
data service is enabled) to open the URL link, the car’s location will be showed
on the Google map.
User can also use the 2nd alarm-received phone to call the tracker, the
tracker will send back the same content with Google link.
Monitor the Voice
SMS command:
111111MON
This instruction is used to monitor the voice around the car. The SIM card
inside the system pays for the communication fee.
SMS command:
111111MON!
This instruction is used to monitor the voice around the car. The user’s
telephone pays for the communication fee.
Example: User uses the mobile 13780012345 to send 111111MON! to the system,
