TK220 GPS Car Alarm Website:www.t10.cn, email:sales@t10.cn User Manual
Page
7
stop your car by our TS03 tracking center also.
The two instructions are u
sed to cut off the car’s power supply or fuel supply,
so as to stop the car.
Attention
:
It is very dangerous to stop the car when the vehicle is running at high
speed. We do not take any responsibility to the consequence caused by this
action.
Restore the Stopped Car to Normal Status
SMS command:
111111RES
This instruction is used to restore the car to normal status after stopping the
car or SOS alert happens.
Monitor the Voice around the Car
SMS command:
111111MON
This instruction is used to monitor the voice around the car.
After sending out this SMS, the tracker will call back immediately, then, user
can monitor the voice around the car upon picking up the call.
Two-way Talking with the Car
SMS command:
111111MON:Tel
This instruction is used to program the phone number which is used for
carrying out direct monitoring or talking.
User uses this phone number to call the tracker, it will be connected
automatically without driver
’s permission. By this way, user can monitor the
voice or talk with the driver freely.
Example: 111111MON:13922713571
Note: If the Tel is the same as the first alarm-received phone (111111*10
Mobile #1*20 Mobile #2*), then this telephone can only be used to carry out
direct monitoring, it can not realize the function arm/disarm by calling any more.