Shanghai TopXGun Robotics Co.,Ltd.
6th Floor,3rd. Building,Elite City,No. 57, AnDemen Street,Yuhua District,Nanjing,China,210012
TEL:
025-86467760
FAX:
025-52323411
fig. 2-11 Unlock
fig.2-12 Lock
2.4 Electric speed controller and compass calibration
The electric speed controller and compass could be calibrated by switching
combination of 5-channel switches on the remote controller.
Electric speed controller calibration
The aircraft propeller should be removed before calibration.
The operating steps for Electric speed controller are as follows:
Step 1. Push throttle to the highest level At this time, status indicator indicates current
status GPS/Compass module and flight mode.
Step 2. Switch 5-channel switches back and forth at lowest level and highest level
about 6 to 10 times until red light on status indicator is on.
Step 3. Keep the throttle position in place, disconnect general supply and then power
on again.
recommended idling speed to unlock, there will be phenomenon of no
idling speed for motor, which can be solved when it is adjusted from
motor idle interface to high idle interface.