ATN60A | AT110A
1.
Carefully remove the scale, pan, and all components out of the
packaging. Place them on a stable surface where the scale will not be
compromised by any mechanical vibrations or high air movements.
Getting Started
2.
Firmly screw in the chamber posts into the screw hole
openings located in the corners of the scale’s top housing.
3.
Place the chamber top frame on the
posts and firmly secure it in place by
screwing in the post crews with the
provided wrench.
4.
Install the back-chamber glass by inserting the
bottom edge into the scale housing
(C’) and
securing the top edge in the chamber top
frame (C’’)
.
5.
Install the left and right chamber access door
by sliding it into the scale housing and the
chamber top frame (C’’’).
