1.
Press the
ON/OFF
key to turn the force gauge ON.
1.
Do not move or attempt to use the force gauge as it is initializing. The force gauge will power on in the last mode
it was turned off.
2.
Once the force gauge is turned on, it is ready to use.
3.
To select or change a mode press the Function key until a desired mode is highlighted. Only enabled modes are
available for selection.
Taking Measurements: Quick Reference Guide
Chapter 7: Taking Measurements and Saving Results
OFF
ZEROING
FCF008
FCF008
STANDARD
MAN
AUT SDM
0.00 N
- +
STANDARD
MAN
AUT SDM
0.00 N
- +
STANDARD
MAN
AUT SDM
0.00 N
- +
STANDARD
MAN
AUT SDM
0.00 N
- +
[Standard]
[Peak]
[Multi Peak]
[Standard]
[Peak]
[Multi Peak]
